OPS 571T Week 2 Practice100% Correct (All Possible Question/Answer)
$7.00

OPS 571T Week 2 Practice100% Correct (All Possible Question/Answer)

This Tutorial was purchased 3 times & rated A+ by student like you.

 

This Tutorial contains following Attachments

  • OPS 571T Week 2 Practice.docx

1.What is the term that means making the person who does the work responsible for ensuring that specifications are met? 2.What are the four general categories of quality costs? 3.A process flowchart uses which of the following symbols to represent a decision point in a flow diagram? 4.To reduce process flow time, you might try which of the following actions? 5.Which of the following terms describes the time a unit spends actually being worked on together with the time spent waiting in a queue? 6.A cost of quality classification is which of the following? 7.DPMO refers to 8.A Pareto chart as part of a Six-Sigma quality improvement process might be found in which DMAIC category? 9.A process flowchart uses which of the following symbols to represent a decision point in a flow diagram? 10.To reduce process flow time, you might try which of the following actions? 11.Which of the following terms describes the time a unit spends actually being worked on together with the time spent waiting in a queue? 12.A cost of quality classification is which of the following? 13.DPMO refers to 14.A Pareto chart as part of a Six-Sigma quality improvement process might be found in which DMAIC category? 15.A process is part of an organization that takes __________, turns them into __________, and adds __________ while doing so. 16.You are in a line at the bank drive-through and 10 cars are in front of you. You estimate that the clerk is taking about five minutes per car to serve. 17.How long do you expect to wait in line, in minutes? 18.What is the term that means making the person who does the work responsible for ensuring that specifications are met? 19.What are the four general categories of quality costs? 20.A process flowchart uses which of the following symbols to represent a decision point in a flow diagram? 21.To reduce process flow time, you might try which of the following actions? 22.Which of the following terms describes the time a unit spends actually being worked on together with the time spent waiting in a queue? 23.A cost of quality classification is which of the following? 24.DPMO refers to 25.A Pareto chart as part of a Six-Sigma quality improvement process might be found in which DMAIC category? 26.A process flowchart uses which of the following symbols to represent a decision point in a flow diagram? 27.To reduce process flow time, you might try which of the following actions? 28.Which of the following terms describes the time a unit spends actually being worked on together with the time spent waiting in a queue? 29.A cost of quality classification is which of the following? 30.DPMO refers to 31.A Pareto chart as part of a Six-Sigma quality improvement process might be found in which DMAIC category? 1)The term CTQ stands for “cost through quality,” which is another way to express Philip Crosby’s idea that “quality is free” 2)A process flowchart uses which of the following symbols to represent tasks or operations in a flow diagram? 3)A flowchart as part of a six-sigma quality improvement process might be found in which DMAIC category? 4)ISO 9000 is primarily concerned with environmental management 5)Which of the following are not eligible to be considered for the baldrige award? 6)Fundamental to any quality program is the determination of quality specifications and the costs of achieving or not achieving those specifications 7)A diamond is conventionally used in a process flowchart to represent a storage area or queue 8)Process analysis can help answer many important questions such as how many customers can a process handle per hour 9)process analysis can help answer many important questions such as why change in a process is necessary 10)To reduce process flow time, you might by which of the following action 11)Utilization of a production process is the ratio of time that a resource is actually being used relative to the time it is available for use 12)which of the following is not a category reported in applying for the baldrige Award 13)A process is any part of an organization that takes inputs and transforms them into outputs that,hopefully,are of greater value to the organization that the original inputs 14)DPMO refers to 15)Blocking in production processes is when activities in a stage must continue because there is no place to deposit completed items 16)TQM was defined in the textbook as managing the entire organization so that it excels on all dimensions of products and service that are important to the customer 17)The dimension of design quality that concerns the consistency of the performance over time or the probability 18)An operational goal of total quality management is the careful design of the product or service 19) Inventory turn is a better measure than the total value of the inventory for comparative purposes because it is a relative measure 20)Methods time management (MTM) and most work measurement system (MOST) are proprietary examples of predetermined motion-time data systems (PMTSs) 21)A quality guru named Philip Crosby defined quality as conformance to requirements 22)A quality guru named Philip Crosby defined quality as conformance to requirements 23)Hybrid process combine features to make-to-order and make-to-stock production processes 24)Which of the following is the cost of Quality classification for costs such as defects that pass through the system (e.g Customer warranty replacements, loss of customer or goodwill, handling Complaints and product repair 25)Applicants for the Baldrige award for total quality management must submit an application of up to 50 pages that details the processes and results of their activities under seven major categories 1.Which of the following is one of those categories? 2.A process is any part of an organization that takes inputs and transforms them into outputs, that hopefully are of greater value to the organization that the original inputs 3.DPMO Refers to 4.Blocking in production process is when activities in a stage must continue because ther is no place to deposit completed items. 5.Assuming all part entering the process during a particular time period will actually finish the process, then the throughput of the process will generally equal which of the following? 6.Total quality management 7.Which of these is not a cost of qualtiy 8.You are in the line at the bank drive-through and 10 cars are in front of you. You estimate that the clerk is taking about five minutes per care to server. How long do you expect to wait in line, in min. 9.What station sets the maximum possible output from this system? 10.What is that maximum output number? 11.What are the four general categories of quality cost 12.What is the term that means making the person who does the work responsible for ensuring that the specifications are met. 13.A process flowchart uses which of the following symbols to represent a decision point in the flow diagram 14.An advantage of a make-to-stock process is which of the following 15.Which of the following best describes the term “cycle time” 16.The philosophical leaders of the quality movement, philp Crosby W Edwards Deming and Joseph M Jaranahd the same general message about what it took to achieve outstanding quality. Which of the following was not part of that message. 17.A fishbone diagram as part of the Six-Sigma Quality improvement process might be found in which DMAIC category.

Write a review

Order Id


Order Id will be kept Confidential
Your Name:


Your Review:
Rating:   A   B   C   D   F  

Enter the code in the box below:



Related Tutorials
$10.00

This Tutorial was purchased 3 times & rated A+ by student like you.

1. Concept development is one of the typical phases of product development. True 2. Ecodesign replaces one or more of the other requirements considered in the design process. 3. Sensitivity analysis of the base-case financial model is a useful tool for which of the following reasons? ..
$7.00

This Tutorial was purchased 3 times & rated A+ by student like you.

The Tuff Wheels was getting ready to start its development project for a new product to be added to their small motorized vehicle line for children. The new product is called the Kiddy Dozer. It will look like a miniature bulldozer, complete with caterpillar tracks and a blade. Tuff Wheels has forec..
$9.00

This Tutorial was purchased 3 times & rated No rating by student like you.

1. Utilization of a production process is the ratio of output to input 2. Benchmarking refers to the practice of comparing the production metrics of one firm with the production metrics of another. 3. One of the tools common to all quality efforts is leadership. 4. Which of the followin..
$9.00

This Tutorial was purchased 4 times & rated A by student like you.

In the textbook, the expression "quality at the source" means that we need to purchase the best quality a supplier or vendor can provide. Is it true or not? Lean production makes implementing green strategies in manufacturing processes more difficult. Is it true or not? A principle of value st..
$7.00

This Tutorial was purchased 3 times & rated A+ by student like you.

JIT manufacturing forces the firm to work with a lower water level despite safety hazards. Is it true or not? An MRP system can allow for product rejects by building a larger batch than is demanded but at JIT system cannot tolerate poor quality. Is it true or not? An MRP system can allow for p..
$9.00

This Tutorial was purchased 5 times & rated A by student like you.

1. The fact that organizations are flattening is one of the reasons that project management is important 2. Derivative projects are those that address incremental changes to products or processes. 3. A disadvantage of a matrix project organizational structure is that a project manager is hel..
$6.00

This Tutorial was purchased 4 times & rated A+ by student like you.

1. What type of chart compares the current project schedule with the original baseline schedule so that deviations from the original plan can be easily noticed? 2. What are the four major categories of project based on the area undergoing change? 3. In a Gantt chart, the horizontal axis is..
$9.00

This Tutorial was purchased 2 times & rated No rating by student like you.

Random errors can be defined as those that cannot be explained by the forecast model being used. Is it true or false? Customer contact refers to creation of the service. Is it true or false? Which of the following considerations is not a factor in deciding which forecasting model a firm ..
$6.00

This Tutorial was purchased 3 times & rated A+ by student like you.

Which of the following forecasting methods is very dependent on selection of the right individuals who will judgmentally be used to actually generate the forecast? Which of the following refers to the physical presence of the customer in a service system? Which of the following considered..
$9.00

This Tutorial was purchased 4 times & rated A+ by student like you.

Services typically have multiple site locations to maintain close contact with customers. The optimal strategy for functional products is to use an efficient supply chain. The effect of the lack of synchronization among supply chain members is referred to as which of the following? In fac..
$7.00

This Tutorial was purchased 0 times & rated A+ by student like you.

If the average aggregate inventory value is $1,200,000 and the cost of goods sold is $600,000, which of the following is inventory turnover? If the average aggregate inventory value is $45,000 and the cost of goods sold is $10,000, which of the following is weeks of supply? Facility location analy..
$3.00

This Tutorial was purchased 4 times & rated A by student like you.

OPS 571T Week 1 Discussion Product Design Philosophy Respond to the following in a minimum of 175 words: • What are the product design philosophies behind industrial design and design for manufacture and assembly? Which one do you think is more important in customer-focused product development? •..
$3.00

This Tutorial was purchased 7 times & rated No rating by student like you.

OPS 571T Week 2 Discussion ISO Certification Respond to the following in a minimum of 175 words: • Is certification under the ISO standards necessary for competing in the modern market? What should companies consider when deciding whether to become certified? • Provide an example of ISO certific..
$3.00

This Tutorial was purchased 5 times & rated A by student like you.

OPS 571T Week 3 Discussion Theory of Constraints Respond to the following in a minimum of 175 words: • Describe an example where theory of constraints (TOC) was successfully applied to improve a process, or where you saw the potential for TOC to improve the process, in either a company you worked ..
$3.00

This Tutorial was purchased 5 times & rated A+ by student like you.

OPS 571T Week 4 Discussion Project Management Consider the most complex project you have been involved in. Respond to the following in a minimum of 175 words: • Briefly describe the project. Give examples of the following as they pertain to the project: • the work breakdown structure • tasks • ..
$3.00

This Tutorial was purchased 3 times & rated A+ by student like you.

OPS 571T Week 5 Discussion Forecasting Respond to the following in a minimum of 175 words: • How has the development of the internet affected the way companies forecast in support of their supply chain planning process? • Provide an example of a successful or unsuccessful forecast. Due Monday R..
$3.00

This Tutorial was purchased 3 times & rated No rating by student like you.

OPS 571T Week 6 Discussion Facility Location Respond to the following in a minimum of 175 words: • If you were starting a new software development company and could locate it anywhere in the world, which place would you choose? • Provide an explanation of the variables you would consider in sel..
$50.00

This Tutorial was purchased 5 times & rated A by student like you.

OPS 571T Apply Week 1 Exam Assignment 100% Correct (All Possible Question/Answer) OPS 571 Week 1 Practice 100% Correct (All Possible Question/Answer) OPS 571T Apply Week 2 Exam Assignment 100% Correct (All Possible Question/Answer) OPS 571T Week 2 Practice100% Correct (All Possible Question/Answe..